driver en Instrumentos Musicales

BD-2 BLUES DRIVER Las raíces del gran sonido. El amplificador a válvulas ha compartido escenario con algunos de los guitarristas más grandes de la historia y el mismo sonido clásico permanece todavía, desde el suave jazz o el chirriante rock hasta el soll

De una distorsión penetrante a un crunch cálido de un amplificador a válvulas, la JD9 ofrece una larga gama de saturaciones. EL control de médium les hará pasar del hard-rock americano al heavy metal ingles sin problemas. . Controles : - Drive - Mid - Ton

MXR and Custom Audio Electronics founder Bob Bradshaw—two names that have shaped the tones of the world's greatest guitarists—join forces to bring you a dynamic new line of pedals. The Boost/Overdrive and Boost pedals are the first offerings in the series

The B300 combines a 10 bass driver and 30 watts of power. 3-band EQ and a preset Shape circuit. Dedicated effects loop, buffered input, a line level output and headphone output. 1x10 Paper driver Power: 30 watts Effects Send and Return Signal-To-Noise: 66

RMS Power Output: 50-Watts LF Driver: 1 x 12 Custom Ampeg Speaker Preamp: Solid-State Power Amp: Solid-State Tone Controls: 3-Band EQ Mid Tone Control: Style and Ultra Mid Line Out: Unbalanced Dimensions (W x H x D inches): 17.25 x 18 x 13 Weight: 39 Poun

The ABM-115 is a 300 watt 8 Ohm bass cabinet featuring a single Ashdown BlueLine driver in a precision tuned plywood cabinet. The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leathe

LF Driver: 1 x 15 Voice Coil: 3 Magnet Weight: 95 oz RMS Power Handling: 400-Watts Frequency Response (-3dB): 50Hz-3kHz Usable Low Frequency (-10dB): 35Hz Nominal Impedance: 8-Ohms Sensitivity: 97dB Maximum SPL: 123dB Dimensions (W x H x D inches): 22.75

LF Drivers: 4 x 10 Custom Designed Speakers Voice Coil: 3 Magnet Weight: 22 oz HF Driver: Horn/Driver Voice Coil: 1 Magnet Weight: 8 oz RMS Power Handling: 200-Watts Frequency Response (-3dB): 55Hz-18kHz Usable Low Frequency (-10dB): 40Hz Crossover Freque

IMPEDANCE 8 ohms SPEAKER SIZE 1x12 in. BASS PORT rear TWEETER 1 compression driver with custom horn POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 40 Hz to 20 kHz SENSITIVITY 99 dB SPL WEIGHT 34.61 lbs / 15.7 kg HEIG

RMS Power Output: 220-Watts LF Driver: 1 x 15 Custom Ampeg Speaker HF Driver: 1 Compression Driver with Level Preamp: Solid-State Power Amp: Solid-State Tone Controls: 3-Band Mid Tone Control: Style Balanced Line Out: Yes Built-in Tuner: Yes Mute Switch:

LF Drivers: 4 x 10 Special Design Speakers Voice Coil: 3 Magnet Weight: 30 oz HF Driver: Horn/Driver Voice Coil: 1 Magnet Weight: 8 oz RMS Power Handling: 400-Watts Frequency Response (-3dB): 50Hz-18kHz Usable Low Frequency (-10dB): 40Hz Crossover Frequen

IMPEDANCE 8 ohms SPEAKER SIZE 2x10 in. BASS PORTS front TWEETER 1 compression driver with custom horn POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 40 Hz to 20 kHz SENSITIVITY 101 dB SPL WEIGHT 49.8 lbs / 22.6 kg WI

IMPEDANCE 4 ohms SPEAKER SIZE 2x10 in. BASS PORTS front TWEETER 1 compression driver with custom horn POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 40 Hz to 20 kHz SENSITIVITY 101 dB SPL WEIGHT 49.8 lbs / 22.6 kg WI

IMPEDENCE 8 ohms SPEAKER SIZE 1x15 in. BASS PORT rear TWEETER 1 compression driver with custom horn POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 40 Hz to 20 kHz SENSITIVITY 100 dB SPL WEIGHT 52.9 lbs / 24 kg WIDTH

The VX3500 combo combines the best selling classic Hartke 3500 amp with a killer new Hartke speaker cabinet loaded with four 10 Hartke VX speakers and a high frequency driver. It is the ultimate 350 Watt bass combo, perfect for any style of bass playing.

LF Drivers: 4 x 10" Voice Coil: 2" Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1" Magnet Weight (each): 8 oz RMS Power Handling: 500-Watts Frequency Response (-3dB): 60Hz-18kHz Usable Low Frequency (-10dB): 43Hz Nominal Impedance: 8-Oh

IMPEDANCE 8 ohms SPEAKER SIZE 4x10 in. BASS PORT rear TWEETER 1 compression driver with custom horn POWER HANDLING 800W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 35 Hz to 20 kHz SENSITIVITY 103 dB SPL WEIGHT 56 lbs / 25.4 kg WIDTH

IMPEDANCE 4 ohms SPEAKER SIZE 4x10 in. BASS PORT rear TWEETER 1 compression driver with custom horn POWER HANDLING 800W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 35 Hz to 20 kHz SENSITIVITY 103 dB SPL WEIGHT 56 lbs / 25.4 kg WIDTH

SPEAKER 1x12 TWEETER 1 compression driver with custom horn BASS REFLEX rear IMPEDANCE 8 ohms SPEAKER POWER HANDLING 400W RMS (AES Standard) AMP OUTPUT POWER 500W @ 4 ohm / 300W @ 8 ohm PREAMP solid state FREQUENCY RESPONSE 45 Hz to 20 kHz CROSSOVER FREQUE

IMPEDENCE 4 ohms SPEAKER SIZE 4x10 in. BASS PORTS front TWEETER 1 compression driver with custom horn POWER HANDLING 800W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 35 Hz to 20 kHz SENSITIVITY 103 dB SPL WEIGHT 65.92 lbs / 29.9 kg W

IMPEDENCE 8 ohms SPEAKER SIZE 4x10 in. BASS PORTS front TWEETER 1 compression driver with custom horn POWER HANDLING 800W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 35 Hz to 20 kHz SENSITIVITY 103 dB SPL WEIGHT 65.92 lbs / 29.9 kg W

LF Drivers: 4 x 10" Voice Coil: 2" Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1" Magnet Weight (each): 8 oz RMS Power Handling: 500-Watts Frequency Response (-3dB): 48Hz-18kHz Usable Low Frequency (-10dB): 28Hz Nominal Impedance: 4-Oh

SPEAKER 1x10 TWEETER 1 HF compression driver with custom horn BASS PORT rear IMPEDANCE 8 ohms SENSITIVITY 101 dB SPL SPEAKER POWER HANDLING 200W RMS (AES Standard) AMP OUTPUT POWER (analog) 250W @ 4 ohm / 150W @ 8 ohm FREQUENCY RESPONSE 45 Hz to 20 kHz CR

SPEAKER 1x6 TWEETER 1 HF compression driver with custom horn BASS PORT rear IMPEDANCE 8 ohms SENSITIVITY 98 dB SPL SPEAKER POWER HANDLING 150W RMS (AES Standard) AMP OUTPUT POWER (analog) 250W @ 4 ohm / 150W @ 8 ohm FREQUENCY RESPONSE 55 Hz to 18 kHz CROS

RMS Power Output (8 Ohms): 275-Watts RMS Power Output (4 Ohms): 450-Watts Preamp: Tubes (3 x 12AX7) Driver Tubes: 1 x 12AX7, 1 x 12AU7 Power Amp: Solid-State Tone Controls: 3-Band Mid Tone Control: 5-Position Graphic EQ: Yes, 9-Band Ultra Low/High Boosts: